Aimix tile adhesive manufacturing plant is widely used to produce all kinds of special mortar and common mortar, such as plaster mortar, waterproof mortar, thermal insulation mortar, tile adhesive mortar, tile grout mortar, bonding mortar, screed mortar, etc. These mortars are widely used as building materials for bridges, railways, workshop, warehouse, sewerage projects, residential construction.
Aimix tile adhesive manufacturing plant has capacity of 3-30 tons per hour, they can be divided into: simple type tile adhesive production line, small type tile adhesive manufacturing plant, middle type tile adhesive manufacturing plant and fully automatic tile adhesive manufacturing plant. We also support customized. Here are details of our tile adhesive manufacturing plant:
Investment advice: low investment with fast investment return, suitable for initial/individual investment.
Main Parts of Aimix Tile Adhesive Manufacturing Plant: wet sand feeding system, drying system, hoist lifting system, raw material storage system, weighting system, mixing system, finished product storage bin, packing system, dust collector and control system. We also support customized service, please contact us for details.
Working Process of Aimix Tile Adhesive Manufacturing Plant:
1. Generally, the raw materials are put into the drying system of tile adhesive manufacturing plant at first.
2. After drying, the raw materials are conveyed to material storage system by hoister.
3. Then, all raw materials and additives will undergo accurate weighting and even blending in the mixing system of tile adhesive equipment.
4. Final process is decided by our clients: they can either pack the mortars in bags or just keep them in the finished product bin according their actual demand.
Aimix tile adhesive manufacturing plant has been exported to over 20 countries, including: Indonesia, Malaysia, Philippines, Peru, UAE, Sri Lanka, etc. Here are several cases of them. If you want to get more details, please contact us.
Aimix 30 t/h tile adhesive manufacturing plant begin put into use for dry mortar production in October, 2019. It took 10 days for tile adhesive manufacturing plant production, and 15 days shipment to Indonesia. While the equipment was shipped to Indonesia, our salesperson and resident engineer came to help our Indonesia clients for installation, commission and operation training service. Our clients high praised Aimix quality & Aimix service. Learn More
Our clients bought this 10 tph tile adhesive manufacturing plant in December 2019. Because of the infulence of Covid-19, it was deliveryed to Malaysia in June 2020. And it took 12 days to transported to Malaysia. We helped installation and running test for our Malaysia clients, and also taught them how to operate this tile adhesive manufacturing plant. Now it has been worked well for our local client and helped a lot for their tile adhesive business. Learn More
Aimix 5-6 tph tile adhesive production line was shipped to Peru in March 2021. It has been used for tile adhesive production now. Our Peru clients first inquiry in December 2020, after learning his requirement, our engineer advice him to buy this simple type tile adhesive production line. He paid for this tile adhesive production line immediately and has fast tranportation. Our Peru clients spoke highly of our good service & timely delivery, and looking for further cooperation. Learn More
Our Indonesia clients bought Aimix 10 tph sand drying line for drying sand of his own tile adhesive production line. Our client sells tile adhesivefor local market, and has asked for Aimix sand drying line since 2019. Because of the room limits of his factory, he couldn’t bought it in 2019. Now he planed to expanding his bisness, and using Aimix sand drying line will largely save his cost of buying dry sand from local market. Learn More
| Type | Productivity (t/h) | Production circle | Number of sand bins | Number of powder bins | Production mortar type | Power(kw) | Floor area |
| AF-3 | 3 | 20min | 0 | 0 | ordinary mortar | 23.5 | 20-30 ㎡ |
| AF-6 | 6 | 20min | 0 | 0 | ordinary mortar | 32.5 | 20-30 ㎡ |
| AF-9 | 9 | 20min | 0 | 0 | ordinary mortar | 36.5 | 30-40 ㎡ |
| AF-10 | 5~10 | 5min | 2x100T | 2x100T | Ordinary mortar and some special mortar | 120 | 37×10m |
| AF-20 | 15-20 | 5min | 2x100T | 2x100T | 150 | 37×10m | |
| AF-30 | 20-30 | 5min | 2x100T | 2x100T | 180 | 37×10m |
If you need other types or other capacity tile adhesive manufacturing plant, please contact us for details. We will reply you in 6 hours and provide you customized service.
1. The design height of tile adhesive manufacturing plant is reasonable, easy to install and maintain;
2. Investment little, easy to get profits;
3. Main systems, such as Drying System, Vibrating Screen System, Mixing System can work separately, convenient to operation;
4. Key parts of the Aimix tile adhesive manufacturing plant adopts international and domestic famous brand, extending the duration significantly;
5. Mixing system: with 60~180s blending, materials are mixed evenly;
6. Drying system: equipped with Triple-cylinder dryer to reduce the sand water content to ≤0.5%;
7. Depending on different raw materials and formulas, weighing device adopt independent system to improve the weighing accuracy greatly;
8. Equipped with dust collection system to collect dust from drying system, weighing system, mixing system and bag packing system, it efficiently protects the working and living environment;
9. Full Automatic control system, convenient for operation and management.
If you’re interested of Aimix tile adhesive manufacturing plant or want to get more details, please contact us.
This website uses cookies.